Journal: ACS Omega

Article Title: Facile Microwave Synthesis of Hierarchical Porous Copper Oxide and Its Catalytic Activity and Kinetics for Carbon Monoxide Oxidation

doi: 10.1021/acsomega.2c05399

Figure Lengend Snippet: (a–d) FE-SEM images of hierarchical porous copper oxide (HP-CuO) prepared by MWS in a closed vessel at 130 °C under MWI for 10 min using a Monowave 300 MWS reactor.

Article Snippet: The reaction vial was transferred into the cavity of an MWS reactor (Monowave 300, Anton-Paar GmbH) that was equipped with an in situ temperature probe to monitor the sample’s temperature.

Techniques:

Journal: ACS Omega

Article Title: Facile Microwave Synthesis of Hierarchical Porous Copper Oxide and Its Catalytic Activity and Kinetics for Carbon Monoxide Oxidation

doi: 10.1021/acsomega.2c05399

Figure Lengend Snippet: Light-off curves of CO oxidation over the CuO catalyst prepared by the CHM and the different HP-CuO catalysts prepared using MWS reactor under MWI for 2, 10, and 30 min.

Article Snippet: The reaction vial was transferred into the cavity of an MWS reactor (Monowave 300, Anton-Paar GmbH) that was equipped with an in situ temperature probe to monitor the sample’s temperature.

Techniques:

Journal: ACS Omega

Article Title: Facile Microwave Synthesis of Hierarchical Porous Copper Oxide and Its Catalytic Activity and Kinetics for Carbon Monoxide Oxidation

doi: 10.1021/acsomega.2c05399

Figure Lengend Snippet: (a) Light-off curves of CO conversion showing the effect of varying the residing time on CO oxidation rates, (b) plots showing the variation in the fractional CO conversion ( X CO ) with W / F CO ratio, and (c) Arrhenius plot for the HP-CuO catalyst prepared by MWI for 10 min using an MWS reactor.

Article Snippet: The reaction vial was transferred into the cavity of an MWS reactor (Monowave 300, Anton-Paar GmbH) that was equipped with an in situ temperature probe to monitor the sample’s temperature.

Techniques:

Journal: Progress In Electromagnetics Research M

Article Title: A Miniaturized Reconfigurable Antenna for Modern Wireless Applications with Broadband and Multi-band Capabilities

doi: 10.2528/pierm24042801

Figure Lengend Snippet: FIGURE 5. Modeling PIN diode behavior in CST MWS.

Article Snippet: The comparison of resonant frequency and bandwidth outcomes achieved for each operating mode is presented in Table 4, while the results obtained by the CST MWS solver and measurement for each operating mode are delineated below: MODE 1: During this mode, both D1 and D2 are turned off, so the two upper parts of the radiating patch act as parasitic elements.

Techniques: